Bronze Composite Decking Capped Fascia Board

BRONZE MIGHTY CROWN Capped Fascia Boards are 3660 X 139  X 9 mm.

As you will see on the next image, fascia boards can be used to provide a matching or contrasting finish to board ends and sides of decking boards and facing subframe joists of decking areas, steps, planters and any other decking creations you are making.

Quantities

To work out the number of Fascia Boards you need, simply measure the total outer edge lengths you require in linear metres, divide by 3.66 and “round up”, this will give you the number of Fascia Boards to order.

If you have any queries, or need help working out quantities needed, please don't hesitate to contact our friendly knowledgeable team.

Installation

Fascia Boards are secured to joist faces with our matching Fascia Screws and look fabulous when mitred on corners.. To allow for expansion and contraction, mark out for 2 screws around every 400 mm and make an oval hole around 6 mm wide, hold the board in place and screw directly through to the joist face.

Colour

MIGHTY CROWN has a very high fade resistance. We have had all the Mighty Crown installed in our outdoor display area here for over a year and so far they remain exactly the same colour as they started. 

When it comes to choosing colours please do bear in mind that the colour you see on your screen will depend on your setting so if you are looking for a particular shade then we advise you come and see our displays here in Whitstable or order a sample to check it is the colour you are looking for.

Terms & Conditions

With all orders, as set out in the "Terms and Conditions", on links at the bottom of every page of this website, when you place an order, you are hereby acknowledging that before ordering, you have read, understood and accepted all the terms.